Description | KEY FEATURES
Output Connections
(6) IEC 320 C13 (Battery Backup)
| KEY FEATURES
Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 - 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168 | KEY FEATURES
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 286V
Expected Battery Life (years)
Battery Charge Power (Watts)
| KEY FEATURES
Audible alarms
Provides notification of changing utility power and UPS conditions.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged |
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
|
Content |
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A
- Battery Backup & Surge Protector for Electronics and Computers
-
- Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum
|
APC Smart-UPS 2200VA, Tower, LCD 230V with SmartConnect Port
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: USB cable
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency
Reduces utility costs, generates less heat.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- SmartSlot
Customize UPS capabilities with management cards.
- StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
| APC Smart-UPS C 1000VA LCD 230V with SmartConnect Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: Power Cords, USB cable
- Cold-start capable Provides temporary battery power when the utility power is out.
- Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency Reduces utility costs, generates less heat.
- LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
OutputMax Configurable Power (Watts)600Watts / 1.0kVAOutput Voltage DistortionLess than 5%Output Frequency (sync to mains)50/60Hz +/- 3 HzOther Output Voltages220, 240TopologyLine InteractiveWaveform typeSine waveTransfer Time6ms typical : 10ms maximumInputInput frequency50/60 Hz +/- 3 Hz (auto sensing)Input voltage range for main operations180 - 287VInput voltage adjustable range for mains operation170 - 300VOther Input Voltages220, 240
| Description
Overview
Lead time |
Usually in Stock |
Main
|
|
|
|
Main Input Voltage |
230 V |
Other Input Voltage |
220 V
240 V |
Main Output Voltage |
230 V |
Other Output Voltage |
220 V
240 V |
rated power in W |
5000 W |
rated power in VA |
5000 VA |
output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
output connector type |
Hard wire 3-wire (H N + E) 1 |
battery type |
Lead-acid battery |
provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
Number of power module free slots |
0 |
Number of power module filled slots |
0 |
redundant |
No |
Physical
height |
17.78 cm |
width |
44 cm |
depth |
62 cm |
net weight |
51.9 kg |
mounting preference |
No preference |
mounting mode |
Rack-mounted with kit |
two post mountable |
0 |
USB compatible |
No |
Input
network frequency |
40...70 Hz auto-sensing |
number of input connectors |
1 hard wire 3-wire (1P + N + E) |
input voltage limits |
160...285 V |
maximum input current |
30 A |
switching current capacity |
40 A |
Output
Maximum configurable power in W |
5000 W |
harmonic distortion |
Less than 2 % |
output frequency |
50/60 Hz +/- 3 Hz sync to mains |
crest factor |
3 : 1 |
UPS type |
Double conversion online |
Wave type |
Sine wave |
bypass type |
Internal bypass (automatic and manual) |
full load runtime |
00:03:30 5000 W |
half load runtime |
00:10:20 2500 W |
Maximum configurable power in VA |
5000 VA |
Conformance
product certifications |
CE |
standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
ambient air temperature for operation |
0…40 °C |
relative humidity |
0…95 % non-condensing |
operating altitude |
0...6600 ft |
ambient air temperature for storage |
-15…45 °C |
storage Relative Humidity |
Non-condensing 0…95 % |
storage altitude |
0.00…15240.00 m |
acoustic level |
55 dBA |
heat dissipation |
1108.95 Btu/h |
IP degree of protection |
IP20 |
Batteries & Runtime
Run Time |
View Runtime Graph
action_new_window |
Efficiency |
View Efficiency Graph
action_new_window |
number of battery filled slots |
2 |
number of battery free slots |
0 |
Battery recharge time |
4 h |
additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
battery voltage |
+/- 96 V |
battery charger power |
239 W rated |
Battery power in VAH |
960 VAh capacity
960 VAh runtime |
battery life |
3…5 year(s) |
Replacement battery |
APCRBC170
action_new_window |
battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
extended runtime |
1 |
Communications & Management
preinstalled device |
Network management card 3 with environmental monitoring |
control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency power off |
Yes |
Surge Protection and Filtering
Surge energy rate |
600 J |
Packing Units
Unit Type of Package 1 |
PCE |
Package 1 Length |
59 cm |
Number of Units in Package 1 |
1 |
Package 1 Width |
79 cm |
Package 1 Height |
27.5 cm |
Package 1 Weight |
59 kg |
Contractual warranty
Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
| Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
|
Reviews
There are no reviews yet.