Description | KEY FEATURES
Output Connections
(6) IEC 320 C13 (Battery Backup)
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged | KEY FEATURES
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Resettable circuit breakers
Enables a quick recovery from overload events.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
| KEY FEATURES
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 286V
Expected Battery Life (years)
Battery Charge Power (Watts)
|
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
| Key Features
Print speed black: Normal: Up to 23 ppm
First page out (ready): Black: As fast as 8.8 sec
Duty cycle (monthly, A4): Up to 50,000 pages per month
Recommended monthly page volume: 2,000 to 5,000
Print technology: Laser
Print quality black (best): Optical: 600 x 600 dpi; Optical: 1200 x 1200 dpi
Print Resolution Technologies: Laser
Print languages: PCL6
Display: 4-Line LCD
Processor speed: 600 MHz
Replacement cartridges: CF256A HP Genuine 56A LaserJet Toner Cartridge (yield 7,400 ISO pages)
CF256X HP Genuine 56X High-Yield Black LaserJet Toner Cartridge (yield 13,700 ISO pages)
CF257A HP 57A Genuine LaserJet Imaging Drum (yield 80,000 pages) |
Content |
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
| Description
Overview
Lead time |
Usually in Stock |
Main
|
|
|
|
Main Input Voltage |
230 V |
Other Input Voltage |
220 V
240 V |
Main Output Voltage |
230 V |
Other Output Voltage |
220 V
240 V |
rated power in W |
5000 W |
rated power in VA |
5000 VA |
output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
output connector type |
Hard wire 3-wire (H N + E) 1 |
battery type |
Lead-acid battery |
provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
Number of power module free slots |
0 |
Number of power module filled slots |
0 |
redundant |
No |
Physical
height |
17.78 cm |
width |
44 cm |
depth |
62 cm |
net weight |
51.9 kg |
mounting preference |
No preference |
mounting mode |
Rack-mounted with kit |
two post mountable |
0 |
USB compatible |
No |
Input
network frequency |
40...70 Hz auto-sensing |
number of input connectors |
1 hard wire 3-wire (1P + N + E) |
input voltage limits |
160...285 V |
maximum input current |
30 A |
switching current capacity |
40 A |
Output
Maximum configurable power in W |
5000 W |
harmonic distortion |
Less than 2 % |
output frequency |
50/60 Hz +/- 3 Hz sync to mains |
crest factor |
3 : 1 |
UPS type |
Double conversion online |
Wave type |
Sine wave |
bypass type |
Internal bypass (automatic and manual) |
full load runtime |
00:03:30 5000 W |
half load runtime |
00:10:20 2500 W |
Maximum configurable power in VA |
5000 VA |
Conformance
product certifications |
CE |
standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
ambient air temperature for operation |
0…40 °C |
relative humidity |
0…95 % non-condensing |
operating altitude |
0...6600 ft |
ambient air temperature for storage |
-15…45 °C |
storage Relative Humidity |
Non-condensing 0…95 % |
storage altitude |
0.00…15240.00 m |
acoustic level |
55 dBA |
heat dissipation |
1108.95 Btu/h |
IP degree of protection |
IP20 |
Batteries & Runtime
Run Time |
View Runtime Graph
action_new_window |
Efficiency |
View Efficiency Graph
action_new_window |
number of battery filled slots |
2 |
number of battery free slots |
0 |
Battery recharge time |
4 h |
additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
battery voltage |
+/- 96 V |
battery charger power |
239 W rated |
Battery power in VAH |
960 VAh capacity
960 VAh runtime |
battery life |
3…5 year(s) |
Replacement battery |
APCRBC170
action_new_window |
battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
extended runtime |
1 |
Communications & Management
preinstalled device |
Network management card 3 with environmental monitoring |
control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency power off |
Yes |
Surge Protection and Filtering
Surge energy rate |
600 J |
Packing Units
Unit Type of Package 1 |
PCE |
Package 1 Length |
59 cm |
Number of Units in Package 1 |
1 |
Package 1 Width |
79 cm |
Package 1 Height |
27.5 cm |
Package 1 Weight |
59 kg |
Contractual warranty
Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
|
SMC2000IFeatures
APC Smart-UPS C 2000VA LCD 230V
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
|
APC Smart-UPS 2200VA, Tower, LCD 230V with SmartConnect Port
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: USB cable
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency
Reduces utility costs, generates less heat.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- SmartSlot
Customize UPS capabilities with management cards.
- StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
| Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
| Description
Key Specifications
LaserJet
Black
Print
Scan
Copy
Wireless
No
Print Speed
Up to 23 ppm
Network Ready
No
Product overview
Count on reliable, affordable A3 MFP productivity to expand potential. Simplify workflows with efficient scan solutions and copying, and get networking plus remote monitoring. 1 Save resources and time with automatic paper-handling features. 2 3
Set the pace with affordable A3 productivity
Conserve resources with automatic two-sided printing and copying 2 – consume up to 50% less paper.
Business copying performance without compromise
Put affordable MFP performance with exceptional value to work for your business.
Built-in networking and remote monitoring
Easily set up, print, and share printing resources with built-in Ethernet networking.
Key Features
Two-sided scanning with 100 sheet reversing
Save time and reduce waste with two-sided scanning that captures all your data in a single pass.
Automatic two-sided printing and copying
Allows you to print on both sides of the page, cutting your paper use by up to 50%
Ethernet
Add this device to your office Ethernet network to share with your workgroup.
Optional second paper tray
Save time by refilling paper less often with an optional paper input tray.
Original HP Cartridges
- CF256A HP Original 56A LaserJet Toner Cartridge (yield 7,400 ISO pages)
- CF256X HP Original 56X High-Yield Black LaserJet Toner Cartridge (yield 13,700 ISO pages)
- CF257A HP 57A Original LaserJet Imaging Drum (yield 80,000 pages)
In the box
What's in the box
- HP LaserJet MFP M436dn
- HP Original Black LaserJet Introductory Toner Cartridge (4,000 page yield)
- HP Original LaserJet Imaging Drum (80,000 page yield)
- Printer documentation and software on CD-ROM
- Quick install guide
- Support flyer
- Warranty card
- Power cord
- USB Cable
Print speed black (ISO, A4) |
Up to 23 ppm |
First page out black (A4, ready) |
As fast as 8.8 sec |
Duty cycle (monthly, A4) |
Up to 50,000 pages per month |
Recommended monthly page volume |
2,000 to 5,000 |
Print technology |
Laser |
Print quality black (best) |
Optical: 600 x 600 dpi
Optical: 1200 x 1200 dpi |
Display |
4-Line LCD |
Wireless capability |
No |
Connectivity, standard |
1 High-speed USB 2.0 Device Port |
Compatible Operating Systems |
Windows OS compatible with In-Box Driver
Windows XP all 32/64-bit editions, Windows Vista all 32/64-bit editions, Windows 7 all 32/64-bit editions, Windows 8/8.1 all 32/64-bit editions (excluding RT OS for Tablets), Windows 10 all 32/64-bit editions (excluding RT OS for Tablets)
Windows OS compatible with Universal Print Driver (From http://www.hp.com)
Windows 7 all 32/64-bit editions, Windows 8/8.1 all 32/64-bit editions (excluding RT OS for Tablets), Windows 10 all 32/64-bit editions (excluding RT OS for Tablets)
Windows 8/8.1/10 RT
Other OS
Linux (available from HPLIP) |
Memory |
128 MB |
Maximum Memory |
128 MB |
Internal Storage |
None |
Paper handling input, standard |
100-sheet multi-purpose tray 1, 250-sheet input tray 2, automatic two-sided printing |
Paper handling input, optional |
Optional 250 sheets |
Paper handling output, standard |
Up to 250 Sheets |
Paper handling output, optional |
No |
Duplex printing |
Plain, Mid-weight, Light, HP LaserJet, Coloured, Preprinted, Recycled, Intermediate, Prepunched
A4, A5, B5(JIS), Executive, Statement, A3, B4(JIS), B5(JIS), 8K, 16K, Oficio 216 x 340 mm, Oficio 60 x 110 g |
Media sizes supported |
A3, A4, A5, B4, B5, Oficio 216 x 340, 8K, 16K |
Media types |
Plain
Mid-weight
Light
HP LaserJet
Coloured
Preprinted
Recycled
Intermediate
Letterhead
Prepunched |
Scanner type |
D-CIS |
Scan resolution, optical |
Up to 600 x 600 dpi |
Scan size, maximum |
297 x 432 mm |
Scan size (ADF), maximum |
Optional ADF: 297 x 432 mm |
Duplex ADF scanning |
Yes |
Automatic document feeder capacity |
Optional, 100 sheets |
Copy speed (black, normal quality, A4) |
Up to 23 cpm |
Copy resolution (black text) |
Platen: Scan 600 x 600, Printing 600 x 600
Document feeder: Scan 600 x 600, Printing 600 x 600 |
Copy resolution (color text and graphics) |
Up to 600 x 600 dpi |
Copy reduce / enlarge settings |
25 to 400% |
Ecolabels |
CECP |
Blue Angel compliant |
No
Please refer to the ECI document |
Operating temperature range |
10 to 30°C |
Recommended operating humidity range |
20 to 80% RH |
Minimum dimensions (W x D x H) |
560 x 540 x 413 mm |
Maximum dimensions (W x D x H) |
960 mm x 1090 mm x 933 mm |
Weight |
25.4 kg (includes supplies) |
Manufacturer Warranty |
One-year warranty. Warranty and support options vary by product, country and local legal requirements. Go to http://www.hp.com/support to learn about HP award winning service and support options in your region. |
|
Reviews
There are no reviews yet.