Description | KEY FEATURES
Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 - 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168 | KEY FEATURES
- IEEE let-through rating and UL 1449 compliance IEEE tests simulate a surge of 6,000 volts, such as
- Data-line Protection Reliable power protection for Notebook computers and data line protection for
- Cord Management To help organize power cords.
- Fail Safe Mode Most other surge suppressors continue to let power through even after their
- 600 Joules
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged | KEY FEATURES
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
• Power Factor : More real output power with 0.7 Pf.
• Pure Sinewave : A pure form of sinewave designed to emulate utility power, will support your device upon battery backup
• Generator Compatible : Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Rugged Metal Construction : Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.
• Automatic Voltage Regulation : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• LCD Display : Intuitive interface provides detailed and accurate information at a glance.
• Generous Number of Outlets : 6 battery backup and surge protected outlets are included across all SMV Easy UPS.
• Battery Connector : A convenient way to disconnect the battery for transport.
• Communication Ports : USB and serial ports for UPS management.
• Safety Agency Approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
| KEY FEATURES
Overview
Presentation |
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. |
Lead time |
Usually in Stock |
Main
|
|
|
|
rated power in W |
600 W |
rated power in VA |
1000 VA |
nb of power socket outlets |
8 IEC 60320 C13 |
output voltage |
230 V |
Output voltage |
220 V
240 V |
input voltage |
230 V |
plug standard |
IEC 320 C14 |
General
Number of power module filled slots |
0 |
Number of power module free slots |
0 |
Number of tare power |
45 W |
product web sub-family |
Cloud-enabled monitoring |
redundant |
No |
provided equipment |
Power cord
USB cable |
Physical
mounting location |
Front |
mounting mode |
Not rack-mountable |
mounting preference |
No preference |
depth |
43.9 cm |
height |
21.9 cm |
net weight |
17.27 kg |
width |
17.1 cm |
two post mountable |
0 |
USB compatible |
Yes |
colour |
Black |
Input
Input voltage |
220 V
240 V |
input voltage limits |
170...300 V adjustable
180...287 V |
network frequency |
50/60 Hz +/- 3 Hz auto-sensing |
Output
harmonic distortion |
Less than 5 % |
Maximum configurable power in VA |
1000 VA |
Maximum configurable power in W |
600 W |
Transfer time |
6 ms typical : 10 ms maximum |
UPS type |
Line interactive |
Wave type |
Sine wave |
output frequency |
50/60 Hz +/- 3 Hz sync to mains |
Conformance
product certifications |
CE
GOST
VDE |
standards |
UL 1778 |
Environmental
acoustic level |
41 dBA |
heat dissipation |
80 Btu/h |
operating altitude |
0...10000 ft |
ambient air temperature for operation |
0…40 °C |
ambient air temperature for storage |
-15…45 °C |
storage altitude |
0.00…15240.00 m |
relative humidity |
0…95 % |
storage Relative Humidity |
0…95 % |
Batteries & Runtime
Run Time |
View Runtime Graph
action_new_window |
Efficiency |
View Efficiency Graph
action_new_window |
battery type |
Lead-acid battery |
extended runtime |
0 |
liquid value |
0 |
number of battery filled slots |
0 |
number of battery free slots |
0 |
Battery recharge time |
3 h |
number of battery replacement quantity |
1 |
battery life |
3…5 year(s) |
Battery power in VAH |
216 VAh runtime |
battery charger power |
72 W rated |
Communications & Management
alarm |
Alarm when on battery : distinctive low battery alarm : configurable delays |
control panel |
Multifunction LCD status and control console |
free slots |
0 |
Surge Protection and Filtering
Surge energy rate |
455 J |
noise suppression |
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Packing Units
Package 1 Weight |
19.55 kg |
Package 1 Height |
37.6 cm |
Package 1 width |
32.8 cm |
Package 1 Length |
59.5 cm |
Number of Units in Package 2 |
1 |
Number of Units in Package 3 |
18 |
Contractual warranty
Warranty |
2 years repair or replace |
| KEY FEATURES
- Allows multiple electrical devices
- Energy saving
- Standby Power
- Protects against power surge
|
Content |
APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A
- Battery Backup & Surge Protector for Electronics and Computers
-
- Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum
|
Damaging power surges associated with lightning or utility problems can travel along your utility and data lines, damaging your electronic devices and destroying your valuable data. Even smaller everyday power surges can degrade the performance of your electronics and decrease their life. The APC Surge Arrest Performance series offers our highest level of power surge protection for your professional computers, electronics and connected devices, as well as provides surge protection for all of your data lines. Its state of the art circuitry provides our best protection for even the most sensitive electronic equipment.
| Description
Overview
Lead time |
Usually in Stock |
Main
|
|
|
|
Main Input Voltage |
230 V |
Other Input Voltage |
220 V
240 V |
Main Output Voltage |
230 V |
Other Output Voltage |
220 V
240 V |
rated power in W |
5000 W |
rated power in VA |
5000 VA |
output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
output connector type |
Hard wire 3-wire (H N + E) 1 |
battery type |
Lead-acid battery |
provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
Number of power module free slots |
0 |
Number of power module filled slots |
0 |
redundant |
No |
Physical
height |
17.78 cm |
width |
44 cm |
depth |
62 cm |
net weight |
51.9 kg |
mounting preference |
No preference |
mounting mode |
Rack-mounted with kit |
two post mountable |
0 |
USB compatible |
No |
Input
network frequency |
40...70 Hz auto-sensing |
number of input connectors |
1 hard wire 3-wire (1P + N + E) |
input voltage limits |
160...285 V |
maximum input current |
30 A |
switching current capacity |
40 A |
Output
Maximum configurable power in W |
5000 W |
harmonic distortion |
Less than 2 % |
output frequency |
50/60 Hz +/- 3 Hz sync to mains |
crest factor |
3 : 1 |
UPS type |
Double conversion online |
Wave type |
Sine wave |
bypass type |
Internal bypass (automatic and manual) |
full load runtime |
00:03:30 5000 W |
half load runtime |
00:10:20 2500 W |
Maximum configurable power in VA |
5000 VA |
Conformance
product certifications |
CE |
standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
ambient air temperature for operation |
0…40 °C |
relative humidity |
0…95 % non-condensing |
operating altitude |
0...6600 ft |
ambient air temperature for storage |
-15…45 °C |
storage Relative Humidity |
Non-condensing 0…95 % |
storage altitude |
0.00…15240.00 m |
acoustic level |
55 dBA |
heat dissipation |
1108.95 Btu/h |
IP degree of protection |
IP20 |
Batteries & Runtime
Run Time |
View Runtime Graph
action_new_window |
Efficiency |
View Efficiency Graph
action_new_window |
number of battery filled slots |
2 |
number of battery free slots |
0 |
Battery recharge time |
4 h |
additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
battery voltage |
+/- 96 V |
battery charger power |
239 W rated |
Battery power in VAH |
960 VAh capacity
960 VAh runtime |
battery life |
3…5 year(s) |
Replacement battery |
APCRBC170
action_new_window |
battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
extended runtime |
1 |
Communications & Management
preinstalled device |
Network management card 3 with environmental monitoring |
control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency power off |
Yes |
Surge Protection and Filtering
Surge energy rate |
600 J |
Packing Units
Unit Type of Package 1 |
PCE |
Package 1 Length |
59 cm |
Number of Units in Package 1 |
1 |
Package 1 Width |
79 cm |
Package 1 Height |
27.5 cm |
Package 1 Weight |
59 kg |
Contractual warranty
Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
| Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
Output
Max Configurable Power (Watts) 2.1kWatts / 3.0kVA
Output Frequency (not synced) 50/60 Hz +/-1 Hz
Load Crest Factor 3:1
Topology Line Interactive
Waveform type Sine wave
Transfer Time 2ms typical
Input
Input frequency 45 – 65 Hz (auto sensing)
Input voltage range for main operations 157 – 303V
Number of Power Cords 1
Other Input Voltages 220, 240
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof
Typical recharge time 4hour(s)
Expected Battery Life (years) 3 – 5
Battery Volt-Amp-Hour Capacity 395
| APC Smart-UPS C 1000VA LCD 230V
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Smart-UPS Features & Benefits
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Smarter productivity with ability to tailor to your specific application needs
Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management
Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
Avoids costly power problems by keeping your IT equipment and data safe and available
Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
Save time with easy and convenient remote accessibility
Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enables a quick recovery from overload events.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
LED status indicators
Quickly understand unit and power status with visual indicators.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Network manageable
Provides remote power management of the UPS over the network.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
| Product details
This high‐quality and efficient UPS Plug Adapter by Neptech enables the connection of multiple electrical devices, with a control indication, standby power and energy saving features. It prevents overloading and protects the device against power surge.
|
Reviews
There are no reviews yet.