Description | KEY FEATURES
Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 - 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168 | KEY FEATURES
- 5 outlet (1 is block spaced) heavy duty surge protector to protect sensitive home and office electronics from damaging power disturbances including surges and spikes
- Fail Safe mode - if the circuit of an APC has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment
- Surge Protection and Wiring Fault LED -
- Safety Shutters
- 1.80 Meter power cord Equipment Protection Policy
|
KEY FEATURES
- Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Customize UPS capabilities with management cards.
- Provides temporary battery power when the utility power is out.
- Enables a quick recovery from overload events.
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
- Warns when a battery is not available to provide backup power.
| KEY FEATURES
- Allows multiple electrical devices
- Energy saving
- Standby Power
- Protects against power surge
| KEY FEATURES
Output Connections
(6) IEC 320 C13 (Battery Backup)
| KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
|
Content |
APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A
- Battery Backup & Surge Protector for Electronics and Computers
-
- Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum
|
Reduces line noise that can cause data loss and keyboard errors. APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential Surge Arrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.
|
APC Smart-UPS 1500VA LCD 230VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.Includes: CD with software, Documentation CD, Installation guide, Smart UPS signalling RS-232 cable, USB cable
- Cold-start capableProvides temporary battery power when the utility power is out.
- Energy meterProvides actual kilowatt hours of usage for energy conscious users.
- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiencyReduces utlility costs, generates less heat.
- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartSlotCustomize UPS capabilities with management cards.
- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Show more
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Resettable circuit breakers Enables a quick recovery from overload events.
| Product details
This high‐quality and efficient UPS Plug Adapter by Neptech enables the connection of multiple electrical devices, with a control indication, standby power and energy saving features. It prevents overloading and protects the device against power surge.
|
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
SKU |
BX750MI-MS |
Brand |
APC |
Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
Output Power Capacity |
410 Watts / 750VA |
Nominal Output Voltage |
230V |
Topology |
Line interactive |
Output Connections |
x2 Universal, x1 IEC 60320 C13 |
Nominal Input Voltage |
230V |
Input Connections |
(1) IEC 60320 C14 Inlets |
Input Voltage Range for Main Operation |
140 – 300V |
Typical Recharge Time |
8hour(s) |
Height |
160MM, 16.0CM |
Width |
120MM, 12.0CM |
Depth |
355MM, 35.5CM |
Weight |
5.4KG |
Warranty |
|
Reviews
There are no reviews yet.