In Stock

APC Back-UPS 1400VA, 230V, AVR, IEC Sockets

140000

KEY FEATURES

Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va  Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 – 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168
  • Free global shipping on all orders
  • 30 days easy returns if you change your mind
  • Order before noon for same day dispatch
Guaranteed Safe Checkout

Description

Product details

APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A

  • Battery Backup & Surge Protector for Electronics and Computers
    • Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
    • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
    • Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
    • Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
    • USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
    • Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised  Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum

Reviews

There are no reviews yet.

Be the first to review “APC Back-UPS 1400VA, 230V, AVR, IEC Sockets”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAPC Back-UPS 1400VA, 230V, AVR, IEC Sockets removeAPC Smart-UPS On-Line,2700 Watts /3000 VA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model removeAPC Easy UPS SMV1500AI-MSX 1500VA, Universal Outlet, 230V removeAPC Smart-UPS C 3000VA LCD 230V removeAPC Easy UPS SMV 750VA, Universal Outlet, 230V removeAPC Easy UPS BV 650VA, AVR, Universal Outlet, 230V remove
NameAPC Back-UPS 1400VA, 230V, AVR, IEC Sockets removeAPC Smart-UPS On-Line,2700 Watts /3000 VA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model removeAPC Easy UPS SMV1500AI-MSX 1500VA, Universal Outlet, 230V removeAPC Smart-UPS C 3000VA LCD 230V removeAPC Easy UPS SMV 750VA, Universal Outlet, 230V removeAPC Easy UPS BV 650VA, AVR, Universal Outlet, 230V remove
ImageAPC-Back-UPS-1400VA-230V-AVR-IEC-Sockets.APC-Easy-UPS-SMV-1500VA-Universal-Outlet-230V-Front-ViewAPC-Smart-UPS-C-3000VA-LCD-230V-Front-View
SKU
Rating
Price140000278000110000049500
Stock
Availability
Add to cart

Description

KEY FEATURES

Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va  Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 - 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168

Key Features

Overview
Presentation High density, double-conversion on-line power protection with scalable runtime.
Lead time Usually in Stock
Main
Run time for load
W
information_stroke
Min-max: 270-2700 W
3min 58s
Max. Capacity Used
information_stroke
100 %
Main Input Voltage 230 V
Other Input Voltage 220 V 240 V
Main Output Voltage 230 V
Other Output Voltage 220 V 240 V
Rated power in W 2700 W
Rated power in VA 3000 VA
plug standard BS1363A British IEC 60320 C20 Schuko CEE 7 / EU1-16P
output connection type 8 IEC 60320 C13 2 IEC Jumpers 2 IEC 60320 C19
Cable length 2.44 m
Number of cables 3
battery type Lead-acid battery
provided equipment CD with software Country-specific detachable power cord Documentation CD Installation guide Removable support feet USB cable Warranty card
General
product web sub-family High density
Number of power module free slots 0
Number of power module filled slots 0
Redundant No
Physical
colour Black
Height 43.2 cm
width 8.5 cm
Depth 63.5 cm
Net weight 31.3 kg
mounting location Front
mounting preference Lower
mounting mode Rack-mounted with kit
Two post mountable 0
USB compatible Yes
mounting position Vertical
Input
network frequency 40...70 Hz auto-sensing
input voltage limits 100...275 V adjustable (half load)
Output
Maximum configurable power in W 2700 W
Harmonic distortion Less than 2 %
output frequency 50/60 Hz +/- 3 Hz sync to mains
crest factor 3 : 1
UPS type Double conversion online
Wave type Sine wave
bypass type Internal bypass (automatic and manual)
Maximum configurable power in VA 3000 VA
Conformance
product certifications CE EAC RCM VDE
Marking CE Mark
standards EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Environmental
Ambient air temperature for operation 0…40 °C
relative humidity 0…95 % non-condensing
Operating altitude 0...10000 ft
Ambient air temperature for storage -15…45 °C
storage Relative Humidity 0…95 % Non-condensing
Storage altitude 0.00…15240.00 m
Acoustic level 55 dBA
Heat dissipation 703 Btu/h
IP degree of protection IP20
Batteries & Runtime
Run Time View Runtime Graph
action_new_window
Efficiency View Efficiency Graph
action_new_window
Battery recharge time 3 h
number of battery replacement quantity 1
Additional information Configurable for 220 : 230 or 240 nominal output voltage
Battery voltage 96 V
battery charger power 168 W rated
Battery power in VAH 505 VAh runtime
Battery life 3…5 year(s)
Replacement battery APCRBC152
action_new_window
battery option SRT96BP 1 1515 VAh SRT96BP 2 2525 VAh SRT96BP 3 3535 VAh SRT96BP 4 4545 VAh SRT96BP 5 5555 VAh SRT96BP 6 6565 VAh SRT96BP 8 8585 VAh SRT96BP 10 10605 VAh
extended runtime 1
Communications & Management
Free slots 1
Control panel Multifunction LCD status and control console
alarm Audible and visible alarms prioritized by severity
Emergency power off Yes
Surge Protection and Filtering
Surge energy rate 340 J
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 24.6 cm
Package 1 Width 87.1 cm
Package 1 Length 59.9 cm
Package 1 Weight 36.74 kg
Number of Units in Package 3 6
Contractual warranty
Warranty 3 years repair or replace (excluding battery) and 2 years for battery
arrow2_down

KEY FEATURES

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers • Power Factor : More real output power with 0.7 Pf. • Pure Sinewave : A pure form of sinewave designed to emulate utility power, will support your device upon battery backup • Generator Compatible : Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. • Rugged Metal Construction : Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components. • Automatic Voltage Regulation : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. • LCD Display : Intuitive interface provides detailed and accurate information at a glance. • Generous Number of Outlets : 6 battery backup and surge protected outlets are included across all SMV Easy UPS. • Battery Connector : A convenient way to disconnect the battery for transport. • Communication Ports : USB and serial ports for UPS management. • Safety Agency Approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

KEY FEATURES

Output

  • Max Configurable Power (Watts)
2.1kWatts / 3.0kVA
  • Output Voltage Distortion
Less than 5% at full load
  • Output Frequency (sync to mains)
50 Hz
  • Topology
Line Interactive
  • Waveform type
Sine wave

Input

  • Input frequency
47 - 63 Hz
  • Input voltage range for main operations
180 - 287V
  • Input voltage adjustable range for mains operation
170 - 300V
  • Other Input Voltages
220, 240

KEY FEATURES

  • Automatic Voltage Regulation (AVR)
  • Cold-start capable
  • LCD graphics display
  • Pure sine wave output on battery

KEY FEATURES

Output power capacity
375Watts / 650VA
Output Connections
(6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC-320 C14
Cord Length
1.52meters
Content

Product details

APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A
  • Battery Backup & Surge Protector for Electronics and Computers
    • Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
    • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
    • Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
    • Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
    • USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
    • Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised  Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum

Description

This product is part of the Smart-UPS On-Line range that provides high density, true double-conversion on-line power protection. This 3000VA/2700W On-line pure sine wave UPS provides scalable runtime while minimizing maintenance. The 2U rack/tower convertible SRT is external battery compatible for more runtime during prolonged outages. The UPS has an optional Network Management Card for network-based monitoring and PowerChute Business Edition for unattended shutdown. It comes with BS1363A British, IEC 60320 C20, and Schuko CEE 7/EU1-16P inputs, 8x IEC 320 C13/60320 C13 and 2x IEC 320 C19/60320 C19 outlets, and 2x IEC jumpers. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. Its dimensions are 635mm (depth) x 432mm (height) x 85mm (width) and weighs 31.30kg. Ideal for servers, voice/data networks, medical labs, and light industrial applications. It conforms to CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, and VDE. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual   Output Max Configurable Power (Watts) 2.1kWatts / 3.0kVA Output Frequency (not synced) 50/60 Hz +/-1 Hz Load Crest Factor 3:1 Topology Line Interactive Waveform type Sine wave Transfer Time 2ms typical   Input Input frequency 45 – 65 Hz (auto sensing) Input voltage range for main operations 157 – 303V Number of Power Cords 1 Other Input Voltages 220, 240   Batteries & Runtime Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof Typical recharge time 4hour(s) Expected Battery Life (years) 3 – 5 Battery Volt-Amp-Hour Capacity 395

Product details

APC Smart-UPS C 3000VA LCD 230VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: CD with software, Documentation CD, USB cable
  • Cold-start capable Provides temporary battery power when the utility power is out.
  • Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency Reduces utility costs, generates less heat.
  • LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
APC Easy UPS Line-interactive SMV 750VA 230V, Universal Outlet Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Output power capacity 525 Watts / 750VA Output Connections (4) Universal Receptacle (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C14
  • Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  • Cold-start capable
Provides temporary battery power when the utility power is out.
  • LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Easy UPS 650VA Features & Benefits

Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Manageability

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions

Protection

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Product Distribution

Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe

Communications & Management

Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating
156Joules
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information