| Description | KEY FEATURES
- Configurable Power output:390 watts /700VA
- Nominal Voltage Output:230v
- Output Frequency:0/60HZ
- Topology:Line Intetactive
- Wavetype form:Stepped approximation to a sinewave
- Cord Length:1.22meters
- Number of Cord:1
- Typical recharge time:6 hours
- Energy Rating:273 joules
- Expected battery life:3-5 years
- Standard Warranty: Two years Warranty from purchase date
| KEY FEATURES
- IEEE let-through rating and UL 1449 compliance IEEE tests simulate a surge of 6,000 volts, such as
- Data-line Protection Reliable power protection for Notebook computers and data line protection for
- Cord Management To help organize power cords.
- Fail Safe Mode Most other surge suppressors continue to let power through even after their
- 600 Joules
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged | KEY FEATURES
- Allows multiple electrical devices
- Energy saving
- Standby Power
- Protects against power surge
|
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
| KEY FEATURES
Output Connections
(6) IEC 320 C13 (Battery Backup)
|
| Content |
APC Back-UPS 700VA, 230V, AVR, IEC Sockets is an Automatic Voltage Regulation (AVR) which automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Back-UPS 700VA, 230V has telephone data line surge protection and Provides protection of connected equipment from power surges traveling on telephone lines. Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety-agency approved, Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets, Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
|
Damaging power surges associated with lightning or utility problems can travel along your utility and data lines, damaging your electronic devices and destroying your valuable data. Even smaller everyday power surges can degrade the performance of your electronics and decrease their life. The APC Surge Arrest Performance series offers our highest level of power surge protection for your professional computers, electronics and connected devices, as well as provides surge protection for all of your data lines. Its state of the art circuitry provides our best protection for even the most sensitive electronic equipment.
| Description
Overview
| Lead time |
Usually in Stock |
Main
|
|
|
|
|
|
| Main Input Voltage |
230 V |
| Other Input Voltage |
220 V
240 V |
| Main Output Voltage |
230 V |
| Other Output Voltage |
220 V
240 V |
| rated power in W |
5000 W |
| rated power in VA |
5000 VA |
| output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
| output connector type |
Hard wire 3-wire (H N + E) 1 |
| battery type |
Lead-acid battery |
| provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
| Number of power module free slots |
0 |
| Number of power module filled slots |
0 |
| redundant |
No |
Physical
| height |
17.78 cm |
| width |
44 cm |
| depth |
62 cm |
| net weight |
51.9 kg |
| mounting preference |
No preference |
| mounting mode |
Rack-mounted with kit |
| two post mountable |
0 |
| USB compatible |
No |
Input
| network frequency |
40...70 Hz auto-sensing |
| number of input connectors |
1 hard wire 3-wire (1P + N + E) |
| input voltage limits |
160...285 V |
| maximum input current |
30 A |
| switching current capacity |
40 A |
Output
| Maximum configurable power in W |
5000 W |
| harmonic distortion |
Less than 2 % |
| output frequency |
50/60 Hz +/- 3 Hz sync to mains |
| crest factor |
3 : 1 |
| UPS type |
Double conversion online |
| Wave type |
Sine wave |
| bypass type |
Internal bypass (automatic and manual) |
| full load runtime |
00:03:30 5000 W |
| half load runtime |
00:10:20 2500 W |
| Maximum configurable power in VA |
5000 VA |
Conformance
| product certifications |
CE |
| standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
| ambient air temperature for operation |
0…40 °C |
| relative humidity |
0…95 % non-condensing |
| operating altitude |
0...6600 ft |
| ambient air temperature for storage |
-15…45 °C |
| storage Relative Humidity |
Non-condensing 0…95 % |
| storage altitude |
0.00…15240.00 m |
| acoustic level |
55 dBA |
| heat dissipation |
1108.95 Btu/h |
| IP degree of protection |
IP20 |
Batteries & Runtime
| Run Time |
View Runtime Graph
action_new_window |
| Efficiency |
View Efficiency Graph
action_new_window |
| number of battery filled slots |
2 |
| number of battery free slots |
0 |
| Battery recharge time |
4 h |
| additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
| battery voltage |
+/- 96 V |
| battery charger power |
239 W rated |
| Battery power in VAH |
960 VAh capacity
960 VAh runtime |
| battery life |
3…5 year(s) |
| Replacement battery |
APCRBC170
action_new_window |
| battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
| extended runtime |
1 |
Communications & Management
| preinstalled device |
Network management card 3 with environmental monitoring |
| control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
| alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off |
Yes |
Surge Protection and Filtering
| Surge energy rate |
600 J |
Packing Units
| Unit Type of Package 1 |
PCE |
| Package 1 Length |
59 cm |
| Number of Units in Package 1 |
1 |
| Package 1 Width |
79 cm |
| Package 1 Height |
27.5 cm |
| Package 1 Weight |
59 kg |
Contractual warranty
| Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
| Product details
This high‐quality and efficient UPS Plug Adapter by Neptech enables the connection of multiple electrical devices, with a control indication, standby power and energy saving features. It prevents overloading and protects the device against power surge.
| Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
|
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
Reviews
There are no reviews yet.