Description | KEY FEATURES
- Configurable Power output:390 watts /700VA
- Nominal Voltage Output:230v
- Output Frequency:0/60HZ
- Topology:Line Intetactive
- Wavetype form:Stepped approximation to a sinewave
- Cord Length:1.22meters
- Number of Cord:1
- Typical recharge time:6 hours
- Energy Rating:273 joules
- Expected battery life:3-5 years
- Standard Warranty: Two years Warranty from purchase date
| KEY FEATURES
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Resettable circuit breakers
Enables a quick recovery from overload events.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
| KEY FEATURES
- IEEE let-through rating and UL 1449 compliance IEEE tests simulate a surge of 6,000 volts, such as
- Data-line Protection Reliable power protection for Notebook computers and data line protection for
- Cord Management To help organize power cords.
- Fail Safe Mode Most other surge suppressors continue to let power through even after their
- 600 Joules
| KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
| KEY FEATURES
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
• Power Factor : More real output power with 0.7 Pf.
• Pure Sinewave : A pure form of sinewave designed to emulate utility power, will support your device upon battery backup
• Generator Compatible : Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Rugged Metal Construction : Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.
• Automatic Voltage Regulation : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• LCD Display : Intuitive interface provides detailed and accurate information at a glance.
• Generous Number of Outlets : 6 battery backup and surge protected outlets are included across all SMV Easy UPS.
• Battery Connector : A convenient way to disconnect the battery for transport.
• Communication Ports : USB and serial ports for UPS management.
• Safety Agency Approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
| KEY FEATURES
- Automatic Voltage Regulation (AVR)
- Cold-start capable
- LCD graphics display
- Pure sine wave output on battery
|
Content |
APC Back-UPS 700VA, 230V, AVR, IEC Sockets is an Automatic Voltage Regulation (AVR) which automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Back-UPS 700VA, 230V has telephone data line surge protection and Provides protection of connected equipment from power surges traveling on telephone lines. Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety-agency approved, Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets, Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
|
SMC2000IFeatures
APC Smart-UPS C 2000VA LCD 230V
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
|
Damaging power surges associated with lightning or utility problems can travel along your utility and data lines, damaging your electronic devices and destroying your valuable data. Even smaller everyday power surges can degrade the performance of your electronics and decrease their life. The APC Surge Arrest Performance series offers our highest level of power surge protection for your professional computers, electronics and connected devices, as well as provides surge protection for all of your data lines. Its state of the art circuitry provides our best protection for even the most sensitive electronic equipment.
|
SKU |
BX750MI-MS |
Brand |
APC |
Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
Output Power Capacity |
410 Watts / 750VA |
Nominal Output Voltage |
230V |
Topology |
Line interactive |
Output Connections |
x2 Universal, x1 IEC 60320 C13 |
Nominal Input Voltage |
230V |
Input Connections |
(1) IEC 60320 C14 Inlets |
Input Voltage Range for Main Operation |
140 – 300V |
Typical Recharge Time |
8hour(s) |
Height |
160MM, 16.0CM |
Width |
120MM, 12.0CM |
Depth |
355MM, 35.5CM |
Weight |
5.4KG |
Warranty |
| Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
Output
Max Configurable Power (Watts) 2.1kWatts / 3.0kVA
Output Frequency (not synced) 50/60 Hz +/-1 Hz
Load Crest Factor 3:1
Topology Line Interactive
Waveform type Sine wave
Transfer Time 2ms typical
Input
Input frequency 45 – 65 Hz (auto sensing)
Input voltage range for main operations 157 – 303V
Number of Power Cords 1
Other Input Voltages 220, 240
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof
Typical recharge time 4hour(s)
Expected Battery Life (years) 3 – 5
Battery Volt-Amp-Hour Capacity 395
| APC Easy UPS Line-interactive SMV 750VA 230V, Universal Outlet
Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.
Output power capacity
525 Watts / 750VA
Output Connections
(4) Universal Receptacle (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC 60320 C14
- Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Provides temporary battery power when the utility power is out.
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
|
Reviews
There are no reviews yet.