Description | KEY FEATURES
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
• Power Factor : More real output power with 0.7 Pf.
• Pure Sinewave : A pure form of sinewave designed to emulate utility power, will support your device upon battery backup
• Generator Compatible : Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Rugged Metal Construction : Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.
• Automatic Voltage Regulation : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• LCD Display : Intuitive interface provides detailed and accurate information at a glance.
• Generous Number of Outlets : 6 battery backup and surge protected outlets are included across all SMV Easy UPS.
• Battery Connector : A convenient way to disconnect the battery for transport.
• Communication Ports : USB and serial ports for UPS management.
• Safety Agency Approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
| KEY FEATURES
Output
- Max Configurable Power (Watts)
2.1kWatts / 3.0kVA
- Output Voltage Distortion
Less than 5% at full load
- Output Frequency (sync to mains)
50 Hz
Line Interactive
Sine wave
Input
47 - 63 Hz
- Input voltage range for main operations
180 - 287V
- Input voltage adjustable range for mains operation
170 - 300V
220, 240
| KEY FEATURES
- Max Configurable Power (Watts)
- 700Watts / 1.0kVA
- Output Frequency (not synced)
- 50/60 Hz +/-1 Hz
- Load Crest Factor
- 3 : 1
- Topology
| KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
| KEY FEATURES
- IEEE let-through rating and UL 1449 compliance IEEE tests simulate a surge of 6,000 volts, such as
- Data-line Protection Reliable power protection for Notebook computers and data line protection for
- Cord Management To help organize power cords.
- Fail Safe Mode Most other surge suppressors continue to let power through even after their
- 600 Joules
| KEY FEATURES
Max Configurable Power (Watts)700Watts / bx1400ui /bx1400va Output Frequency (sync to mains)50/60 Hz +/-1 Hz Output Frequency (not synced)50/60 Hz +/-1 Hz TopologyLine Interactive Waveform type Stepped approximation to a sine wave Transfer Time 8ms typical : 10 ms maximumBattery typeLead-acid batteryTypical recharge time8hour(s)Expected Battery Life (years)2 - 5Battery Charge Power (Watts)21WattsBattery Volt-Amp-Hour Capacity168 |
Content | Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
Output
Max Configurable Power (Watts) 2.1kWatts / 3.0kVA
Output Frequency (not synced) 50/60 Hz +/-1 Hz
Load Crest Factor 3:1
Topology Line Interactive
Waveform type Sine wave
Transfer Time 2ms typical
Input
Input frequency 45 – 65 Hz (auto sensing)
Input voltage range for main operations 157 – 303V
Number of Power Cords 1
Other Input Voltages 220, 240
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof
Typical recharge time 4hour(s)
Expected Battery Life (years) 3 – 5
Battery Volt-Amp-Hour Capacity 395
|
APC Smart-UPS C 3000VA LCD 230VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: CD with software, Documentation CD, USB cable
- Cold-start capable Provides temporary battery power when the utility power is out.
- Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency Reduces utility costs, generates less heat.
- LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
|
Brand |
APC |
Warranty Period |
1 Year |
Ensure you charge this UPS for Minimum of 6 hrs. before using it.
Easy Ups SMV 1500va 230v AVR Universal Outlet Sockets
Battery Backup & Surge Protector for Electronics and Computer
SMV1500AI-MS Features APC Easy UPS SMV 1500VA, Universal Outlet, 230V Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Easy UPS Features & Benefits
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Audible alarms Provides notification of changing utility power and UPS power conditions Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Features Cold-start capable Provides temporary battery power when the utility power is out. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
APC Easy UPS SMV 1000VA, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual
- Max Configurable Power (Watts)
- 700Watts / 1.0kVA
- Output Frequency (not synced)
- 50/60 Hz +/-1 Hz
- Load Crest Factor
- 3 : 1
- Topology
- Line Interactive
- Waveform type
- Sine wave
- Transfer Time
- 2ms typical
|
SKU |
BX750MI-MS |
Brand |
APC |
Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
Output Power Capacity |
410 Watts / 750VA |
Nominal Output Voltage |
230V |
Topology |
Line interactive |
Output Connections |
x2 Universal, x1 IEC 60320 C13 |
Nominal Input Voltage |
230V |
Input Connections |
(1) IEC 60320 C14 Inlets |
Input Voltage Range for Main Operation |
140 – 300V |
Typical Recharge Time |
8hour(s) |
Height |
160MM, 16.0CM |
Width |
120MM, 12.0CM |
Depth |
355MM, 35.5CM |
Weight |
5.4KG |
Warranty |
|
Damaging power surges associated with lightning or utility problems can travel along your utility and data lines, damaging your electronic devices and destroying your valuable data. Even smaller everyday power surges can degrade the performance of your electronics and decrease their life. The APC Surge Arrest Performance series offers our highest level of power surge protection for your professional computers, electronics and connected devices, as well as provides surge protection for all of your data lines. Its state of the art circuitry provides our best protection for even the most sensitive electronic equipment.
|
APC Back-UPS bx1400ui, 1400va 230V, AVR, IEC Sockets Battery Backup & Surge Protector for Electronics and Computers Includes: User Manual. Output power capacity 700Watts / 1.4kVAOutput Connections(2) IEC 320 C13 (Battery Backup)Nominal Output Voltage230VNominal Input Voltage230VInput ConnectionsIEC-320 C14, NEMA 5-15PCord Length1.22metersMaximum Input Current6.0A
- Battery Backup & Surge Protector for Electronics and Computers
-
- Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Max Configurable Power (Watts)700Watts / 1.4kVAOutput Frequency (sync to mains)50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Line interactive Waveform type Stepped approximation to a sinewave Transfer Time8 ms typical : 10 ms maximum
|
Reviews
There are no reviews yet.