| Description |
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
| KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
| KEY FEATURES
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 286V
Expected Battery Life (years)
Battery Charge Power (Watts)
| KEY FEATURES
Audible alarms
Provides notification of changing utility power and UPS conditions.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged | KEY FEATURES
Overview
| Presentation |
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. |
| Lead time |
Usually in Stock |
Main
|
|
|
|
|
|
| rated power in W |
600 W |
| rated power in VA |
1000 VA |
| nb of power socket outlets |
8 IEC 60320 C13 |
| output voltage |
230 V |
| Output voltage |
220 V
240 V |
| input voltage |
230 V |
| plug standard |
IEC 320 C14 |
General
| Number of power module filled slots |
0 |
| Number of power module free slots |
0 |
| Number of tare power |
45 W |
| product web sub-family |
Cloud-enabled monitoring |
| redundant |
No |
| provided equipment |
Power cord
USB cable |
Physical
| mounting location |
Front |
| mounting mode |
Not rack-mountable |
| mounting preference |
No preference |
| depth |
43.9 cm |
| height |
21.9 cm |
| net weight |
17.27 kg |
| width |
17.1 cm |
| two post mountable |
0 |
| USB compatible |
Yes |
| colour |
Black |
Input
| Input voltage |
220 V
240 V |
| input voltage limits |
170...300 V adjustable
180...287 V |
| network frequency |
50/60 Hz +/- 3 Hz auto-sensing |
Output
| harmonic distortion |
Less than 5 % |
| Maximum configurable power in VA |
1000 VA |
| Maximum configurable power in W |
600 W |
| Transfer time |
6 ms typical : 10 ms maximum |
| UPS type |
Line interactive |
| Wave type |
Sine wave |
| output frequency |
50/60 Hz +/- 3 Hz sync to mains |
Conformance
| product certifications |
CE
GOST
VDE |
| standards |
UL 1778 |
Environmental
| acoustic level |
41 dBA |
| heat dissipation |
80 Btu/h |
| operating altitude |
0...10000 ft |
| ambient air temperature for operation |
0…40 °C |
| ambient air temperature for storage |
-15…45 °C |
| storage altitude |
0.00…15240.00 m |
| relative humidity |
0…95 % |
| storage Relative Humidity |
0…95 % |
Batteries & Runtime
| Run Time |
View Runtime Graph
action_new_window |
| Efficiency |
View Efficiency Graph
action_new_window |
| battery type |
Lead-acid battery |
| extended runtime |
0 |
| liquid value |
0 |
| number of battery filled slots |
0 |
| number of battery free slots |
0 |
| Battery recharge time |
3 h |
| number of battery replacement quantity |
1 |
| battery life |
3…5 year(s) |
| Battery power in VAH |
216 VAh runtime |
| battery charger power |
72 W rated |
Communications & Management
| alarm |
Alarm when on battery : distinctive low battery alarm : configurable delays |
| control panel |
Multifunction LCD status and control console |
| free slots |
0 |
Surge Protection and Filtering
| Surge energy rate |
455 J |
| noise suppression |
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Packing Units
| Package 1 Weight |
19.55 kg |
| Package 1 Height |
37.6 cm |
| Package 1 width |
32.8 cm |
| Package 1 Length |
59.5 cm |
| Number of Units in Package 2 |
1 |
| Number of Units in Package 3 |
18 |
Contractual warranty
| Warranty |
2 years repair or replace |
|
| Content | Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
|
| SKU |
BX750MI-MS |
| Brand |
APC |
| Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
| Output Power Capacity |
410 Watts / 750VA |
| Nominal Output Voltage |
230V |
| Topology |
Line interactive |
| Output Connections |
x2 Universal, x1 IEC 60320 C13 |
| Nominal Input Voltage |
230V |
| Input Connections |
(1) IEC 60320 C14 Inlets |
| Input Voltage Range for Main Operation |
140 – 300V |
| Typical Recharge Time |
8hour(s) |
| Height |
160MM, 16.0CM |
| Width |
120MM, 12.0CM |
| Depth |
355MM, 35.5CM |
| Weight |
5.4KG |
| Warranty |
|
APC Smart-UPS 2200VA, Tower, LCD 230V with SmartConnect Port
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: USB cable
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency
Reduces utility costs, generates less heat.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- SmartSlot
Customize UPS capabilities with management cards.
- StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
| APC Smart-UPS C 1000VA LCD 230V with SmartConnect Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: Power Cords, USB cable
- Cold-start capable Provides temporary battery power when the utility power is out.
- Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency Reduces utility costs, generates less heat.
- LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
OutputMax Configurable Power (Watts)600Watts / 1.0kVAOutput Voltage DistortionLess than 5%Output Frequency (sync to mains)50/60Hz +/- 3 HzOther Output Voltages220, 240TopologyLine InteractiveWaveform typeSine waveTransfer Time6ms typical : 10ms maximumInputInput frequency50/60 Hz +/- 3 Hz (auto sensing)Input voltage range for main operations180 - 287VInput voltage adjustable range for mains operation170 - 300VOther Input Voltages220, 240
| Description
Overview
| Lead time |
Usually in Stock |
Main
|
|
|
|
|
|
| Main Input Voltage |
230 V |
| Other Input Voltage |
220 V
240 V |
| Main Output Voltage |
230 V |
| Other Output Voltage |
220 V
240 V |
| rated power in W |
5000 W |
| rated power in VA |
5000 VA |
| output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
| output connector type |
Hard wire 3-wire (H N + E) 1 |
| battery type |
Lead-acid battery |
| provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
| Number of power module free slots |
0 |
| Number of power module filled slots |
0 |
| redundant |
No |
Physical
| height |
17.78 cm |
| width |
44 cm |
| depth |
62 cm |
| net weight |
51.9 kg |
| mounting preference |
No preference |
| mounting mode |
Rack-mounted with kit |
| two post mountable |
0 |
| USB compatible |
No |
Input
| network frequency |
40...70 Hz auto-sensing |
| number of input connectors |
1 hard wire 3-wire (1P + N + E) |
| input voltage limits |
160...285 V |
| maximum input current |
30 A |
| switching current capacity |
40 A |
Output
| Maximum configurable power in W |
5000 W |
| harmonic distortion |
Less than 2 % |
| output frequency |
50/60 Hz +/- 3 Hz sync to mains |
| crest factor |
3 : 1 |
| UPS type |
Double conversion online |
| Wave type |
Sine wave |
| bypass type |
Internal bypass (automatic and manual) |
| full load runtime |
00:03:30 5000 W |
| half load runtime |
00:10:20 2500 W |
| Maximum configurable power in VA |
5000 VA |
Conformance
| product certifications |
CE |
| standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
| ambient air temperature for operation |
0…40 °C |
| relative humidity |
0…95 % non-condensing |
| operating altitude |
0...6600 ft |
| ambient air temperature for storage |
-15…45 °C |
| storage Relative Humidity |
Non-condensing 0…95 % |
| storage altitude |
0.00…15240.00 m |
| acoustic level |
55 dBA |
| heat dissipation |
1108.95 Btu/h |
| IP degree of protection |
IP20 |
Batteries & Runtime
| Run Time |
View Runtime Graph
action_new_window |
| Efficiency |
View Efficiency Graph
action_new_window |
| number of battery filled slots |
2 |
| number of battery free slots |
0 |
| Battery recharge time |
4 h |
| additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
| battery voltage |
+/- 96 V |
| battery charger power |
239 W rated |
| Battery power in VAH |
960 VAh capacity
960 VAh runtime |
| battery life |
3…5 year(s) |
| Replacement battery |
APCRBC170
action_new_window |
| battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
| extended runtime |
1 |
Communications & Management
| preinstalled device |
Network management card 3 with environmental monitoring |
| control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
| alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off |
Yes |
Surge Protection and Filtering
| Surge energy rate |
600 J |
Packing Units
| Unit Type of Package 1 |
PCE |
| Package 1 Length |
59 cm |
| Number of Units in Package 1 |
1 |
| Package 1 Width |
79 cm |
| Package 1 Height |
27.5 cm |
| Package 1 Weight |
59 kg |
Contractual warranty
| Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
| APC Smart-UPS C 1000VA LCD 230V
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Smart-UPS Features & Benefits
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Smarter productivity with ability to tailor to your specific application needs
Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management
Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
Avoids costly power problems by keeping your IT equipment and data safe and available
Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
Save time with easy and convenient remote accessibility
Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enables a quick recovery from overload events.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
LED status indicators
Quickly understand unit and power status with visual indicators.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Network manageable
Provides remote power management of the UPS over the network.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
|
Reviews
There are no reviews yet.