Description |
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
| KEY FEATURES
- 5 outlet (1 is block spaced) heavy duty surge protector to protect sensitive home and office electronics from damaging power disturbances including surges and spikes
- Fail Safe mode - if the circuit of an APC has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment
- Surge Protection and Wiring Fault LED -
- Safety Shutters
- 1.80 Meter power cord Equipment Protection Policy
| KEY FEATURES
Technical Specifications
Output power capacity 2.1kWatts / 3.0kVA
Nominal Output Voltage 230V
Nominal Input Voltage 230V
Input Connections IEC-320 C20
Warranty:2 Years repair or replace | KEY FEATURES
- Max Configurable Power (Watts)
- 700Watts / 1.0kVA
- Output Frequency (not synced)
- 50/60 Hz +/-1 Hz
- Load Crest Factor
- 3 : 1
- Topology
| Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged | KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
|
Content | Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
|
Reduces line noise that can cause data loss and keyboard errors. APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential Surge Arrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.
| Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
- Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Cold-start capable Provides temporary battery power when the utility power is out.
- LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions
- Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Cold-start capable Provides temporary battery power when the utility power is out.Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
-
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
|
Brand |
APC |
Warranty Period |
1 Year |
Ensure you charge this UPS for Minimum of 6 hrs. before using it.
Easy Ups SMV 1500va 230v AVR Universal Outlet Sockets
Battery Backup & Surge Protector for Electronics and Computer
SMV1500AI-MS Features APC Easy UPS SMV 1500VA, Universal Outlet, 230V Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Cold-start capable Provides temporary battery power when the utility power is out. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Easy UPS Features & Benefits
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Audible alarms Provides notification of changing utility power and UPS power conditions Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Features Cold-start capable Provides temporary battery power when the utility power is out. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
APC Easy UPS SMV 1000VA, Universal Outlet, 230VBest Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual
- Max Configurable Power (Watts)
- 700Watts / 1.0kVA
- Output Frequency (not synced)
- 50/60 Hz +/-1 Hz
- Load Crest Factor
- 3 : 1
- Topology
- Line Interactive
- Waveform type
- Sine wave
- Transfer Time
- 2ms typical
| Description
Overview
Lead time |
Usually in Stock |
Main
|
|
|
|
Main Input Voltage |
230 V |
Other Input Voltage |
220 V
240 V |
Main Output Voltage |
230 V |
Other Output Voltage |
220 V
240 V |
rated power in W |
5000 W |
rated power in VA |
5000 VA |
output connection type |
2 IEC 60320 C13
1 IEC 60320 C19 |
output connector type |
Hard wire 3-wire (H N + E) 1 |
battery type |
Lead-acid battery |
provided equipment |
Smart UPS signalling RS-232 cable
User manual
USB cable |
General
Number of power module free slots |
0 |
Number of power module filled slots |
0 |
redundant |
No |
Physical
height |
17.78 cm |
width |
44 cm |
depth |
62 cm |
net weight |
51.9 kg |
mounting preference |
No preference |
mounting mode |
Rack-mounted with kit |
two post mountable |
0 |
USB compatible |
No |
Input
network frequency |
40...70 Hz auto-sensing |
number of input connectors |
1 hard wire 3-wire (1P + N + E) |
input voltage limits |
160...285 V |
maximum input current |
30 A |
switching current capacity |
40 A |
Output
Maximum configurable power in W |
5000 W |
harmonic distortion |
Less than 2 % |
output frequency |
50/60 Hz +/- 3 Hz sync to mains |
crest factor |
3 : 1 |
UPS type |
Double conversion online |
Wave type |
Sine wave |
bypass type |
Internal bypass (automatic and manual) |
full load runtime |
00:03:30 5000 W |
half load runtime |
00:10:20 2500 W |
Maximum configurable power in VA |
5000 VA |
Conformance
product certifications |
CE |
standards |
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018 |
Environmental
ambient air temperature for operation |
0…40 °C |
relative humidity |
0…95 % non-condensing |
operating altitude |
0...6600 ft |
ambient air temperature for storage |
-15…45 °C |
storage Relative Humidity |
Non-condensing 0…95 % |
storage altitude |
0.00…15240.00 m |
acoustic level |
55 dBA |
heat dissipation |
1108.95 Btu/h |
IP degree of protection |
IP20 |
Batteries & Runtime
Run Time |
View Runtime Graph
action_new_window |
Efficiency |
View Efficiency Graph
action_new_window |
number of battery filled slots |
2 |
number of battery free slots |
0 |
Battery recharge time |
4 h |
additional information |
Configurable for 220 : 230 or 240 nominal output voltage |
battery voltage |
+/- 96 V |
battery charger power |
239 W rated |
Battery power in VAH |
960 VAh capacity
960 VAh runtime |
battery life |
3…5 year(s) |
Replacement battery |
APCRBC170
action_new_window |
battery option |
SRTG192XLBP4 1 2651 VAh
SRTG192XLBP4 2 4424 VAh
SRTG192XLBP4 3 6314 VAh
SRTG192XLBP4 4 8118 VAh |
extended runtime |
1 |
Communications & Management
preinstalled device |
Network management card 3 with environmental monitoring |
control panel |
LED Status display with on line : on battery
Multifunction LCD status and control console |
alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency power off |
Yes |
Surge Protection and Filtering
Surge energy rate |
600 J |
Packing Units
Unit Type of Package 1 |
PCE |
Package 1 Length |
59 cm |
Number of Units in Package 1 |
1 |
Package 1 Width |
79 cm |
Package 1 Height |
27.5 cm |
Package 1 Weight |
59 kg |
Contractual warranty
Warranty |
3 years repair or replace (excluding battery) and 2 years for battery |
|
SKU |
BX750MI-MS |
Brand |
APC |
Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
Output Power Capacity |
410 Watts / 750VA |
Nominal Output Voltage |
230V |
Topology |
Line interactive |
Output Connections |
x2 Universal, x1 IEC 60320 C13 |
Nominal Input Voltage |
230V |
Input Connections |
(1) IEC 60320 C14 Inlets |
Input Voltage Range for Main Operation |
140 – 300V |
Typical Recharge Time |
8hour(s) |
Height |
160MM, 16.0CM |
Width |
120MM, 12.0CM |
Depth |
355MM, 35.5CM |
Weight |
5.4KG |
Warranty |
|
Reviews
There are no reviews yet.