Description | KEY FEATURES
- -OUTPUT-
- Power Rating: 750VA/410W
- Nominal Output Voltage: 230V
- Output Voltage(On Battery): 230+/-10%@ 100% load
- Output Frequency(Hz): 50/60Hz+/-0.5Hz
- Topology: Line Interactive
- Waveform Type: Stepped approximation to a sinewave
- Output Connections(Battery Backup): 2 Universal + 1 IEC 320 C13
- -INPUT-
- Nominal Input Voltage: 230V
- Input Connections: NEMA 5-15P
- Input Cord: 1.2m
- Input Frequency: 50Hz or 60Hz
| KEY FEATURES
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Resettable circuit breakers
Enables a quick recovery from overload events.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
| KEY FEATURES
- Get up to 5,000 pages of toner right out of the box
- Get print speeds up to 20 ppm
- Tackle the essentials – print, scan, copy
- Uncompromising laser quality
- Automate scanning tasks and save time
| KEY FEATURES
- 5 outlet (1 is block spaced) heavy duty surge protector to protect sensitive home and office electronics from damaging power disturbances including surges and spikes
- Fail Safe mode - if the circuit of an APC has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment
- Surge Protection and Wiring Fault LED -
- Safety Shutters
- 1.80 Meter power cord Equipment Protection Policy
| KEY FEATURES
- Configurable Power output:390 watts /700VA
- Nominal Voltage Output:230v
- Output Frequency:0/60HZ
- Topology:Line Intetactive
- Wavetype form:Stepped approximation to a sinewave
- Cord Length:1.22meters
- Number of Cord:1
- Typical recharge time:6 hours
- Energy Rating:273 joules
- Expected battery life:3-5 years
- Standard Warranty: Two years Warranty from purchase date
| KEY FEATURES
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 286V
Expected Battery Life (years)
Battery Charge Power (Watts)
|
Content |
SKU |
BX750MI-MS |
Brand |
APC |
Model |
[BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets |
Output Power Capacity |
410 Watts / 750VA |
Nominal Output Voltage |
230V |
Topology |
Line interactive |
Output Connections |
x2 Universal, x1 IEC 60320 C13 |
Nominal Input Voltage |
230V |
Input Connections |
(1) IEC 60320 C14 Inlets |
Input Voltage Range for Main Operation |
140 – 300V |
Typical Recharge Time |
8hour(s) |
Height |
160MM, 16.0CM |
Width |
120MM, 12.0CM |
Depth |
355MM, 35.5CM |
Weight |
5.4KG |
Warranty |
|
SMC2000IFeatures
APC Smart-UPS C 2000VA LCD 230V
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
| Description
Easily print at high volumes with the world's first cartridge-free laser printer – includes 5,000 pages of toner. Count on HP quality at an ultra-low cost. Print and scan virtually anywhere with HP Smart – best-in-class mobile print app.
Engineered for high-volume printing – get 5.000 pages of toner right out of the box. Get 5000 pages of toner right out of the box– up to 7x more pages than in-class HP lasers.
Get simple setup, and print and scan from your phone, with the HP Smart app. Easy reload your toner with a mess-free experience with print speeds up to 20 ppm
Produce sharp text and bold blacks for high-quality, black-and-white.
documents. HP NeverStop with Original HP Toner Reload Kit meets ecolabel requirements, including ENERGY STAR 3.0 and BLUE ANGEL. Breeze through tasks with versatile MFP performance – print, scan, and copy. Quickly and easily restore toner levels with the toner reload kit.
Start printing right away. The intuitive control panel helps you complete projects quickly and easily Ideal for business owners looking for a competitive edge, who want a printer that matches how they run their business and get work done – at a great value.
|
Reduces line noise that can cause data loss and keyboard errors. APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential Surge Arrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions. Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.
|
APC Back-UPS 700VA, 230V, AVR, IEC Sockets is an Automatic Voltage Regulation (AVR) which automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Back-UPS 700VA, 230V has telephone data line surge protection and Provides protection of connected equipment from power surges traveling on telephone lines. Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety-agency approved, Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets, Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
|
APC Smart-UPS 2200VA, Tower, LCD 230V with SmartConnect Port
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: USB cable
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency
Reduces utility costs, generates less heat.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- SmartSlot
Customize UPS capabilities with management cards.
- StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
|
Reviews
There are no reviews yet.