| Description | KEY FEATURES
Output
- Max Configurable Power (Watts)
2.1kWatts / 3.0kVA
- Output Voltage Distortion
Less than 5% at full load
- Output Frequency (sync to mains)
50 Hz
Line Interactive
Sine wave
Input
47 - 63 Hz
- Input voltage range for main operations
180 - 287V
- Input voltage adjustable range for mains operation
170 - 300V
220, 240
| KEY FEATURES
Output Connections
(6) IEC 320 C13 (Battery Backup)
|
KEY FEATURES
- Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Customize UPS capabilities with management cards.
- Provides temporary battery power when the utility power is out.
- Enables a quick recovery from overload events.
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
- Warns when a battery is not available to provide backup power.
| KEY FEATURES
- IEEE let-through rating and UL 1449 compliance IEEE tests simulate a surge of 6,000 volts, such as
- Data-line Protection Reliable power protection for Notebook computers and data line protection for
- Cord Management To help organize power cords.
- Fail Safe Mode Most other surge suppressors continue to let power through even after their
- 600 Joules
|
Max Configurable Power (Watts)
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 280V
Expected Battery Life (years)
Battery Charge Power (Watts)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery
| KEY FEATURES
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 - 302 Adjustable, 160 - 286V
Expected Battery Life (years)
Battery Charge Power (Watts)
|
| Content |
APC Smart-UPS C 3000VA LCD 230VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: CD with software, Documentation CD, USB cable
- Cold-start capable Provides temporary battery power when the utility power is out.
- Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency Reduces utility costs, generates less heat.
- LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
|
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Angola, Burundi, Botswana, Djibouti, Eritrea, Ethiopia, Ghana, Israel, Iraq, Jordan, Kenya, Lebanon, Malawi, Mozambique, Namibia, Nigeria, Rwanda, Sierra Leone, Somalia, Tanzania, Uganda, Zambia, Zimbabwe
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
APC Smart-UPS 1500VA LCD 230VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.Includes: CD with software, Documentation CD, Installation guide, Smart UPS signalling RS-232 cable, USB cable
- Cold-start capableProvides temporary battery power when the utility power is out.
- Energy meterProvides actual kilowatt hours of usage for energy conscious users.
- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiencyReduces utlility costs, generates less heat.
- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartSlotCustomize UPS capabilities with management cards.
- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Show more
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Resettable circuit breakers Enables a quick recovery from overload events. |
Damaging power surges associated with lightning or utility problems can travel along your utility and data lines, damaging your electronic devices and destroying your valuable data. Even smaller everyday power surges can degrade the performance of your electronics and decrease their life. The APC Surge Arrest Performance series offers our highest level of power surge protection for your professional computers, electronics and connected devices, as well as provides surge protection for all of your data lines. Its state of the art circuitry provides our best protection for even the most sensitive electronic equipment.
| Intelligent and efficient network power protection from entry level to scale able runtime.
Ideal for servers, point-of-sale, routers, switches ,hub and others.
It is cold-start capable which provides temporary battery power when the utility power is out.
It has energy meter which provides the actual kilowatt hours of usage for energy conscious users
it has intuitive LCD interface which provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys
It has pure sine wave output on battery which simulates utility power to provide the highest degree of compatibility for active PFC ( power factor corrected ) servers and sensitive electronics.
It has SmartSLot which customize the ups capability with management cards.
It has USB connectivity which provides management of the ups via a USB portIt has disconnected battery notification which warns when a battery is not available to provide back up power.
it has LED indicators, serial connectivity, Audible alarms, Adjustable voltage sensitivity, adjustable voltage transfer point.
|
APC Smart-UPS 2200VA, Tower, LCD 230V with SmartConnect Port
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: USB cable
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency
Reduces utility costs, generates less heat.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
- SmartSlot
Customize UPS capabilities with management cards.
- StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Intelligent battery management
|
Reviews
There are no reviews yet.