APC Back-UPS 700VA, 230V, AVR, IEC Sockets is an Automatic Voltage Regulation (AVR) which automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Back-UPS 700VA, 230V has telephone data line surge protection and Provides protection of connected equipment from power surges traveling on telephone lines. Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety-agency approved, Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets, Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “APC Back-UPS BX750MI-MS, 750VA, AVR, 375Watts/650VA 230V” Cancel reply
Standard Warranty: Two years Warranty from purchase date
Keywords
SRTG5KXLI – APC Smart-UPS RT 5kVA 230V. The APC™ by Schneider Electric Smart-UPS™ On-Line SRTG is a high performance uninterruptible power supply(UPS). The UPS helps provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged
KEY FEATURES
Output power capacity
375Watts / 650VA
Output Connections
(6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC-320 C14
Cord Length
1.52meters
KEY FEATURES
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
• Power Factor : More real output power with 0.7 Pf.
• Pure Sinewave : A pure form of sinewave designed to emulate utility power, will support your device upon battery backup
• Generator Compatible : Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Rugged Metal Construction : Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.
• Automatic Voltage Regulation : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• LCD Display : Intuitive interface provides detailed and accurate information at a glance.
• Generous Number of Outlets : 6 battery backup and surge protected outlets are included across all SMV Easy UPS.
• Battery Connector : A convenient way to disconnect the battery for transport.
• Communication Ports : USB and serial ports for UPS management.
• Safety Agency Approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
KEY FEATURES
Technical SpecificationsOutput power capacity 2.1kWatts / 3.0kVA
Nominal Output Voltage 230V
Nominal Input Voltage 230V
Input Connections IEC-320 C20
Warranty:2 Years repair or replace
Key Features
Overview
Presentation
High density, double-conversion on-line power protection with scalable runtime.
Lead time
Usually in Stock
Main
Run time for load
W
information_stroke
Min-max: 270-2700 W
3min 58s
Max. Capacity Used
information_stroke
100 %
Main Input Voltage
230 V
Other Input Voltage
220 V
240 V
Main Output Voltage
230 V
Other Output Voltage
220 V
240 V
Rated power in W
2700 W
Rated power in VA
3000 VA
plug standard
BS1363A British
IEC 60320 C20
Schuko CEE 7 / EU1-16P
output connection type
8 IEC 60320 C13
2 IEC Jumpers
2 IEC 60320 C19
Cable length
2.44 m
Number of cables
3
battery type
Lead-acid battery
provided equipment
CD with software
Country-specific detachable power cord
Documentation CD
Installation guide
Removable support feet
USB cable
Warranty card
Audible and visible alarms prioritized by severity
Emergency power off
Yes
Surge Protection and Filtering
Surge energy rate
340 J
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
24.6 cm
Package 1 Width
87.1 cm
Package 1 Length
59.9 cm
Package 1 Weight
36.74 kg
Number of Units in Package 3
6
Contractual warranty
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
arrow2_down
Content
Product details
APC Back-UPS 700VA, 230V, AVR, IEC Sockets is an Automatic Voltage Regulation (AVR) which automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC Back-UPS 700VA, 230V has telephone data line surge protection and Provides protection of connected equipment from power surges traveling on telephone lines. Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Safety-agency approved, Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets, Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
Description
Overview
Lead time
Usually in Stock
Main
Run time for load
W
information_stroke
Min-max: 500-5000 W
2min 50s
Max. Capacity Used
information_stroke
100 %
Main Input Voltage
230 V
Other Input Voltage
220 V
240 V
Main Output Voltage
230 V
Other Output Voltage
220 V
240 V
rated power in W
5000 W
rated power in VA
5000 VA
output connection type
2 IEC 60320 C13
1 IEC 60320 C19
output connector type
Hard wire 3-wire (H N + E) 1
battery type
Lead-acid battery
provided equipment
Smart UPS signalling RS-232 cable
User manual
USB cable
Network management card 3 with environmental monitoring
control panel
LED Status display with on line : on battery
Multifunction LCD status and control console
alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power off
Yes
Surge Protection and Filtering
Surge energy rate
600 J
Packing Units
Unit Type of Package 1
PCE
Package 1 Length
59 cm
Number of Units in Package 1
1
Package 1 Width
79 cm
Package 1 Height
27.5 cm
Package 1 Weight
59 kg
Contractual warranty
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Easy UPS 650VA Features & Benefits
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Manageability
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
156Joules
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
Output
Max Configurable Power (Watts) 2.1kWatts / 3.0kVA
Output Frequency (not synced) 50/60 Hz +/-1 Hz
Load Crest Factor 3:1
Topology Line Interactive
Waveform type Sine wave
Transfer Time 2ms typical
Input
Input frequency 45 – 65 Hz (auto sensing)
Input voltage range for main operations 157 – 303V
Number of Power Cords 1
Other Input Voltages 220, 240
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leak-proof
Typical recharge time 4hour(s)
Expected Battery Life (years) 3 – 5
Battery Volt-Amp-Hour Capacity 395
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Includes: Documentation CD, USB cable, User Manual
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Cold-start capable Provides temporary battery power when the utility power is out.
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Cold-start capable Provides temporary battery power when the utility power is out.Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Description
This product is part of the Smart-UPS On-Line range that provides high density, true double-conversion on-line power protection. This 3000VA/2700W On-line pure sine wave UPS provides scalable runtime while minimizing maintenance. The 2U rack/tower convertible SRT is external battery compatible for more runtime during prolonged outages. The UPS has an optional Network Management Card for network-based monitoring and PowerChute Business Edition for unattended shutdown. It comes with BS1363A British, IEC 60320 C20, and Schuko CEE 7/EU1-16P inputs, 8x IEC 320 C13/60320 C13 and 2x IEC 320 C19/60320 C19 outlets, and 2x IEC jumpers. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. Its dimensions are 635mm (depth) x 432mm (height) x 85mm (width) and weighs 31.30kg. Ideal for servers, voice/data networks, medical labs, and light industrial applications. It conforms to CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, and VDE. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.
Reviews
There are no reviews yet.